查看完整版本: 看清《资金流量》的蚁巴

看清《资金流量》的蚁巴

[size=5][color=red]    关于《资金流量》半年前我在答YNGS的贴子中就玩过，很多人要我讲一下用法和变化，于是才写了下面一段......[/color][/size]
[size=5][color=red]     yuexinpan 兄弟的<资金流量>相当好,我最终改成这样......[/color][/size]

QJJ:=VOL / (((HIGH - LOW) * 2) - ABS(CLOSE - OPEN));
XVL:=QJJ * (CLOSE-OPEN);
HSL:=((XVL / 20) / 1.15);
攻击流量:=(HSL * 5 + REF(HSL,1) * 3 + REF(HSL,2) * 2)*0.11;
STICKLINE(((HSL * 0.4) >= 0),((HSL * 0.4) * 1.5),0,1,0),color808080;
STICKLINE(((HSL * 0.4) < 0),((HSL * 0.4) * 1.5),0,1,0),color808080;
GJJ:=EMA(攻击流量,8);
LLJX:=EMA(攻击流量,3);
资金流量:LLJX,LINETHICK0,PRECIS1,color0000FF;
STICKLINE((资金流量 > 0),资金流量,0,7,0),color0000FF;
STICKLINE((资金流量 < 0),资金流量,0,7,0),colorFF0000;
流量基线:GJJ,coloryellow;
ZJLL:=REF(LLJX,1);
QZJJ:=(((LLJX - ZJLL) / ZJLL) * 100);
流量增幅:IF(((LLJX > 0) AND (ZJLL < 0)),ABS(QZJJ),IF((((LLJX < 0) AND (ZJLL < 0)) AND (LLJX < ZJLL)),(0 - QZJJ),QZJJ)),colorwhite,LINETHICK0;
ZLL:=(VOL / CAPITAL);
HSL1:=IF((ZLL > 10),10,ZLL);
力度:(HSL / 1000),coloryellow,LINETHICK0;
周流量:SUM(LLJX,5),colormagenta,linethick0;
BB:=REF(周流量,1);
ZQZJJ:=(((周流量 - BB) / BB) * 100);
周增幅:IF(((周流量 > 0) AND (BB < 0)),ABS(ZQZJJ),IF((((周流量 < 0) AND (BB < 0)) AND (周流量 < BB)),(0 - ZQZJJ),ZQZJJ)),linethick0,COLOR00FF00;
P3:=(BIGORDER(1)-BIGORDER(2))*vol;
DDX:=P3/CAPITAL*100;
DDX1:=SUM(DDX,0);
DDXA2:=DDX>0.1;
DDXA2:=DDX>0.4;
资金流量D:=(ref(资金流量,0)) > 15 AND  (ref(资金流量,1))<-10 ;
红:资金流量D=1,COLOR00FF00,LINETHICK0;
星:资金流量D=1 AND DDXA2=1,COLOR00FF00,LINETHICK0;
攻击:=(HSL * 0.4) * 1.5;
攻:=((ref(资金流量,1) >10) AND  (ref(资金流量,1) <800) AND (ref(攻击,1) <-1000) ) AND ((资金流量>100 AND 攻击>1000));
杀:周增幅>资金流量*3 AND 资金流量>100 AND DDXA2=1;
跌幅:(c/ref(C,1)-1)*100;
停:=跌幅>9;
DRAWTEXT(停=1 ,L*0.2 , '停'),COLOR00FF00,LINETHICK5;
DRAWTEXT(攻=1 ,L*40 , '攻'),COLOR00FF00,LINETHICK5,ALIGN1;
DRAWTEXT(红=1 ,L*40 , '¤'),COLOR00FF00,LINETHICK1,ALIGN1;
DRAWTEXT(星=1 ,L*40 , '★'),COLOR00FF00,LINETHICK5,ALIGN1;
DRAWTEXT(杀=1 ,L*40 , '杀'),COLOR00FF00,LINETHICK3,ALIGN1;
[size=4][color=red]剖析:
1,首先要明白<资金流量>是一种压缩图(cndeqv)的看法，他是k线与量结合形的指标。
XVL:=VOL * (CLOSE-OPEN)/ ((HIGH - LOW) * 2- ABS(CLOSE - OPEN));
这也就是说<资金流量>与vol成正比，与（c-o）这个k线真实幅度（实体）成正比。
((HIGH - LOW) * 2- ABS(CLOSE - OPEN))的意思是“k线的绝对振幅+蚁巴（上下引和）”，也就是“真实幅度+两倍的蚁巴”，即加长蚁巴幅度。<资金流量>与加长蚁巴幅度成反比。
——通过这个式子我们可以看出：<资金流量>对k线的要求是实体越大蚁巴越短越好,即"实体/(实体+2*蚁巴)";在这个要求下vol量越大越好。这在他的那根灰细蚁巴上反映的更明显
2，那么这个要求具体是多少呢？在这个量和幅度的看法下<资金流量>的自我蚁巴什么时候上翘，什么时候下摆呢？
我们看到这个条件：HSL * 0.4)>= 0，
实际上也就是（HSL * 5 + REF(HSL,1) * 3 + REF(HSL,2) * 2>=0，
变下形也就是：5*MA(HSL,2)+REF(HSL,2)>=REF(HSL,1) ,这也就是说近三天来的平均副度变化应大于昨天副度变化的六分之一就符合细蚁巴（那条细灰线）上翘的要求了。当然了，这个式子还可以看出他加大了近两天平均HSL的权重。
      待续......[/color][/size]

[[i] 本帖最后由 刀小 于 2007-6-1 12:12 编辑 [/i]]

老师 说的真好 学习

继续！

回复 #1 刀小 的帖子

3q  dddddddddd

hao

通不过.

dzh2通过
谢谢提供分享

BARSLAST函数飞狐没有替代函数呀？！

[size=4][color=Red]昨天提到这一句“HSL * 5 + REF(HSL,1) * 3 + REF(HSL,2) * 2”，我觉得还是解释的不好！
于是变了一下：5*(ma(hsl,3)*3-(2*REF(HSL,1) +3*REF(HSL,2) )/5)

看出来吗？也就近似5*(3*ma(hsl,3)-ema(ref(hsl,1),4)).......
为什么说近似，惊人的相似就是惊人的不是.....(2*REF(HSL,1) +3*REF(HSL,2) )/5表示ema从前天开始计算，只算昨天的ema；而实际的ema是从历史第一天开始计算，累计到现在....所以是不同的！这样写只是让大家便于理解罢了！

通过这样写我们知道“攻击流量”不过是这两条线的离差而已，由于是用的ema所以幅度大约是2/5即0.04而已就上翘下摆了......
至于
流量基线:=EMA(攻击流量,8);
资金流量:=EMA(攻击流量,3);红蓝实体，平滑过后不过是幅度上再滞后2/9及1/2罢了......
至此资金流量尾巴部分分析完毕！

下面是谈一下用法......见汪洋论坛图片[/color][/size]

[[i] 本帖最后由 刀小 于 2007-6-3 11:18 编辑 [/i]]

我对楼主的水平十分敬佩！！在飞狐专业网页发送飞狐不能使用的指标，甚至没有办法转换，也是一种挑战，可惜飞狐的高手都不愿意维护飞狐软件了，大智慧2真的天下无敌了吗？南客先生在哪里哦！！

BARSLAST(1)是什么

BIdvol(1)?

P3:=(BARSLAST(1)-BARSLAST(2))*vol;通不过 !

[color=Red]相当于委比大单买卖量差[/color]

[quote]原帖由 [i]刀小[/i] 于 2007-6-2 21:13 发表
P3:=(BARSLAST(1)-BARSLAST(2))*vol;通不过 !

相当于委比大单买卖量差 [/quote]

多谢老师释疑！！

深奥，学习中．

好，顶，能否编个对分笔成交进行统计，分别计算买的和卖的，通过买卖差，判断资金是流入 ，还是流出？再加上5日，10,15,20日的统计，及 换手率，并显示数字，画线。

这两个公式能加在一起优化嘛

VAR11:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH = CLOSE)) AND (LOW = OPEN));
VAR12:=((VOL * (CLOSE - OPEN)) / (HIGH - LOW));
VD1:=IF(VAR11,VAR12,0);
VZ1:=IF(VAR11,0,0);
VAR21:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH = CLOSE)) AND (LOW < OPEN));
VAR22:=(VOL * (((CLOSE - OPEN) / (HIGH - LOW)) + (((2 / 3) * (OPEN - LOW)) / (HIGH - LOW))));
VAR23:=((((VOL * 1) / 3) * (OPEN - LOW)) / (HIGH - LOW));
VD2:=IF(VAR21,VAR22,0);
VZ2:=IF(VAR21,VAR23,0);
VAR31:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH > CLOSE)) AND (LOW = OPEN));
VAR32:=(VOL * (((CLOSE - OPEN) / (HIGH - LOW)) + (((1 / 3) * (HIGH - CLOSE)) / (HIGH - LOW))));
VAR33:=((((VOL * 2) / 3) * (HIGH - CLOSE)) / (HIGH - LOW));
VD3:=IF(VAR31,VAR32,0);
VZ3:=IF(VAR31,VAR33,0);
VAR41:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH > CLOSE)) AND (LOW < OPEN));
VAR42:=(VOL * ((((CLOSE - OPEN) / (HIGH - LOW)) + (((1 / 3) * (HIGH - CLOSE)) / (HIGH - LOW))) + (((2 / 3) * (OPEN - LOW)) / (HIGH - LOW))));
VAR43:=(VOL * ((((2 / 3) * (HIGH - CLOSE)) / (HIGH - LOW)) + (((1 / 3) * (OPEN - LOW)) / (HIGH - LOW))));
VD4:=IF(VAR41,VAR42,0);
VZ4:=IF(VAR41,VAR43,0);
VAR51:=((((HIGH > LOW) AND (CLOSE < OPEN)) AND (HIGH = OPEN)) AND (LOW = CLOSE));
VAR52:=((VOL * (OPEN - CLOSE)) / (HIGH - LOW));
VD5:=IF(VAR51,0,0);
VZ5:=IF(VAR51,VAR52,0);
VAR61:=((((HIGH > LOW) AND (CLOSE < OPEN)) AND (HIGH = OPEN)) AND (LOW < CLOSE));
VAR62:=((((VOL * (CLOSE - LOW)) / (HIGH - LOW)) * 2) / 3);
VAR63:=(VOL * (((OPEN - CLOSE) / (HIGH - LOW)) + (((1 / 3) * (CLOSE - LOW)) / (HIGH - LOW))));
VD6:=IF(VAR61,VAR62,0);
VZ6:=IF(VAR61,VAR63,0);
VAR71:=((((HIGH > LOW) AND (CLOSE < OPEN)) AND (HIGH > OPEN)) AND (LOW = CLOSE));
VAR72:=((((VOL * 1) / 3) * (HIGH - OPEN)) / (HIGH - LOW));
VAR73:=(VOL * (((OPEN - CLOSE) / (HIGH - LOW)) + (((2 / 3) * (HIGH - OPEN)) / (HIGH - LOW))));
VD7:=IF(VAR71,VAR72,0);
VZ7:=IF(VAR71,VAR73,0);
VAR81:=((((HIGH > LOW) AND (CLOSE < OPEN)) AND (HIGH > OPEN)) AND (LOW < CLOSE));
VAR82:=(VOL * ((((1 / 3) * (HIGH - OPEN)) / (HIGH - LOW)) + (((2 / 3) * (CLOSE - LOW)) / (HIGH - LOW))));
VAR83:=(VOL * ((((OPEN - CLOSE) / (HIGH - LOW)) + (((2 / 3) * (HIGH - OPEN)) / (HIGH - LOW))) + (((1 / 3) * (CLOSE - LOW)) / (HIGH - LOW))));
VD8:=IF(VAR81,VAR82,0);
VZ8:=IF(VAR81,VAR83,0);
VAR91:=((((HIGH > LOW) AND (CLOSE = OPEN)) AND (HIGH = CLOSE)) AND (LOW < CLOSE));
VAR92:=((VOL * 2) / 3);
VAR93:=((VOL * 1) / 3);
VD9:=IF(VAR91,VAR92,0);
VZ9:=IF(VAR91,VAR93,0);
VAR101:=((((HIGH > LOW) AND (CLOSE = OPEN)) AND (HIGH > CLOSE)) AND (LOW = CLOSE));
VAR102:=((((VOL * 1) / 3) * (HIGH - LOW)) / (HIGH - LOW));
VAR103:=((((VOL * 2) / 3) * (HIGH - LOW)) / (HIGH - LOW));
VD10:=IF(VAR101,VAR102,0);
VZ10:=IF(VAR101,VAR103,0);
VAR111:=((((HIGH > LOW) AND (CLOSE = OPEN)) AND (HIGH > CLOSE)) AND (LOW < CLOSE));
VAR112:=(VOL * ((((1 / 3) * (HIGH - CLOSE)) / (HIGH - LOW)) + (((2 / 3) * (CLOSE - LOW)) / (HIGH - LOW))));
VAR113:=(VOL * ((((2 / 3) * (HIGH - CLOSE)) / (HIGH - LOW)) + (((1 / 3) * (CLOSE - LOW)) / (HIGH - LOW))));
VD11:=IF(VAR111,VAR112,0);
VZ11:=IF(VAR111,VAR113,0);
VAR121:=(((((HIGH = LOW) AND (CLOSE = OPEN)) AND (HIGH = CLOSE)) AND (LOW = CLOSE)) AND ((((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) * 100) > 9.75));
VD12:=IF(VAR121,VOL,0);
VAR122:=(((((HIGH = LOW) AND (CLOSE = OPEN)) AND (HIGH = CLOSE)) AND (LOW = CLOSE)) AND ((((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) * 100) < (0 - 9.75)));
VZ12:=IF(VAR122,VOL,0);
VAR131:=((((((HIGH = LOW) AND (CLOSE = OPEN)) AND (HIGH = CLOSE)) AND (LOW = CLOSE)) AND ((((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) * 100) < 9.75)) AND ((((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) * 100) > (0 - 9.75)));
VD13:=IF(VAR131,(0.5 * VOL),0);
VAR132:=((((((HIGH = LOW) AND (CLOSE = OPEN)) AND (HIGH = CLOSE)) AND (LOW = CLOSE)) AND ((((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) * 100) < 9.75)) AND ((((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) * 100) > (0 - 9.75)));
VZ13:=IF(VAR132,(0.5 * VOL),0);
((((((((((((VD1 + VD2) + VD3) + VD4) + VD5) + VD6) + VD7) + VD8) + VD9) + VD10) + VD11) + VD12) + VD13);


VAR11:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH = CLOSE)) AND (LOW = OPEN));
VAR12:=((VOL * (CLOSE - OPEN)) / (HIGH - LOW));
VD1:=IF(VAR11,VAR12,0);
VZ1:=IF(VAR11,0,0);
VAR21:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH = CLOSE)) AND (LOW < OPEN));
VAR22:=(VOL * (((CLOSE - OPEN) / (HIGH - LOW)) + (((2 / 3) * (OPEN - LOW)) / (HIGH - LOW))));
VAR23:=((((VOL * 1) / 3) * (OPEN - LOW)) / (HIGH - LOW));
VD2:=IF(VAR21,VAR22,0);
VZ2:=IF(VAR21,VAR23,0);
VAR31:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH > CLOSE)) AND (LOW = OPEN));
VAR32:=(VOL * (((CLOSE - OPEN) / (HIGH - LOW)) + (((1 / 3) * (HIGH - CLOSE)) / (HIGH - LOW))));
VAR33:=((((VOL * 2) / 3) * (HIGH - CLOSE)) / (HIGH - LOW));
VD3:=IF(VAR31,VAR32,0);
VZ3:=IF(VAR31,VAR33,0);
VAR41:=((((HIGH > LOW) AND (CLOSE > OPEN)) AND (HIGH > CLOSE)) AND (LOW < OPEN));
VAR42:=(VOL * ((((CLOSE - OPEN) / (HIGH - LOW)) + (((1 / 3) * (HIGH - CLOSE)) / (HIGH - LOW))) + (((2 / 3) * (OPEN - LOW)) / (HIGH - LOW))));
VAR43:=(VOL * ((((2 / 3) * (HIGH - CLOSE)) / (HIGH - LOW)) + (((1 / 3) * (OPEN - LOW)) / (HIGH - LOW))));
VD4:=IF(VAR41,VAR42,0);
VZ4:=IF(VAR41,VAR43,0);
VAR51:=((((HIGH > LOW) AND (CLOSE < OPEN)) AND (HIGH = OPEN)) AND (LOW = CLOSE));
VAR52:=((VOL * (OPEN - CLOSE)) / (HIGH - LOW));
VD5:=IF(VAR51,0,0);
VZ5:=IF(VAR51,VAR52,0);
VAR61:=((((HIGH > LOW) AND (CLOSE < OPEN)) AND (HIGH = OPEN)) AND (LOW < CLOSE));
VAR62:=((((VOL * (CLOSE - LOW)) / (HIGH - LOW)) * 2) / 3);
VAR63:=(VOL * (((OPEN - CLOSE) / (HIGH - LOW)) + (((1 / 3) * (CLOSE - LOW)) / (HIGH - LOW))));
VD6:=IF(VAR61,VAR62,0);
VZ6:=IF(VAR61,VAR63,0);
VAR71:=((((HIGH > LOW) AND (CLOSE < OPEN)) AND (HIGH > OPEN)) AND (LOW = CLOSE));
VAR72:=((((VOL * 1) / 3) * (HIGH - OPEN)) / (HIGH - LOW));
VAR73:=(VOL * (((OPEN - CLOSE) / (HIGH - LOW)) + (((2 / 3) * (HIGH - OPEN)) / (HIGH - LOW))));
此量神公式，加在一起就更好了

对楼主十分的钦敬

ok

期待用法。

ok

jb

资金流量:LLJX,LINETHICK0,PRECIS1
楼主，这句通不过，请指点

[quote]原帖由 [i]zhyulc[/i] 于 2007-8-12 00:07 发表
资金流量:LLJX,LINETHICK0,PRECIS1
楼主，这句通不过，请指点 [/quote]
我把   PRECIS1  删除就行了:):

[[i] 本帖最后由 myfst 于 2007-9-3 16:18 编辑 [/i]]

[quote]原帖由 [i]刀小[/i] 于 2007-6-2 21:13 发表
P3:=(BARSLAST(1)-BARSLAST(2))*vol;通不过 !

相当于委比大单买卖量差 [/quote]
我改为P3:=(DYNAINFO(18)-DYNAINFO(19))*vol;就好了~~:):

PRECIS1改成了PRECISION1
P3:=(BIGORDER(1)-BIGORDER(2))*vol改成了P3:=(DYNAINFO(18)-DYNAINFO(19))*vol
飞狐和大智慧2显示得不一样，大家可以对照一下杭萧钢构。

QJJ:=VOL / (((HIGH - LOW) * 2) - ABS(CLOSE - OPEN));
XVL:=QJJ * (CLOSE-OPEN);
HSL:=((XVL / 20) / 1.15);
攻击流量:=(HSL * 5 + REF(HSL,1) * 3 + REF(HSL,2) * 2)*0.11;
STICKLINE(((HSL * 0.4) >= 0),((HSL * 0.4) * 1.5),0,1,0),color808080;
STICKLINE(((HSL * 0.4) < 0),((HSL * 0.4) * 1.5),0,1,0),color808080;
GJJ:=EMA(攻击流量,8);
LLJX:=EMA(攻击流量,3);
资金流量:LLJX,LINETHICK0,PRECISION1,color0000FF;
STICKLINE((资金流量 > 0),资金流量,0,7,0),color0000FF;
STICKLINE((资金流量 < 0),资金流量,0,7,0),colorFF0000;
流量基线:GJJ,coloryellow;
ZJLL:=REF(LLJX,1);
QZJJ:=(((LLJX - ZJLL) / ZJLL) * 100);
流量增幅:IF(((LLJX > 0) AND (ZJLL < 0)),ABS(QZJJ),IF((((LLJX < 0) AND (ZJLL < 0)) AND (LLJX < ZJLL)),(0 - QZJJ),QZJJ)),colorwhite,LINETHICK0;
ZLL:=(VOL / CAPITAL);
HSL1:=IF((ZLL > 10),10,ZLL);
力度:(HSL / 1000),coloryellow,LINETHICK0;
周流量:SUM(LLJX,5),colormagenta,linethick0;
BB:=REF(周流量,1);
ZQZJJ:=(((周流量 - BB) / BB) * 100);
周增幅:IF(((周流量 > 0) AND (BB < 0)),ABS(ZQZJJ),IF((((周流量 < 0) AND (BB < 0)) AND (周流量 < BB)),(0 - ZQZJJ),ZQZJJ)),linethick0,COLOR00FF00;
P3:=(DYNAINFO(18)-DYNAINFO(19))*vol;
DDX:=P3/CAPITAL*100;
DDX1:=SUM(DDX,0);
DDXA2:=DDX>0.1;
DDXA2:=DDX>0.4;
资金流量D:=(ref(资金流量,0)) > 15 AND  (ref(资金流量,1))<-10 ;
红:资金流量D=1,COLOR00FF00,LINETHICK0;
星:资金流量D=1 AND DDXA2=1,COLOR00FF00,LINETHICK0;
攻击:=(HSL * 0.4) * 1.5;
攻:=((ref(资金流量,1) >10) AND  (ref(资金流量,1) <800) AND (ref(攻击,1) <-1000) ) AND ((资金流量>100 AND 攻击>1000));
杀:周增幅>资金流量*3 AND 资金流量>100 AND DDXA2=1;
跌幅:(c/ref(C,1)-1)*100;
停:=跌幅>9;
DRAWTEXT(停=1 ,L*0.2 , '停'),COLOR00FF00,LINETHICK5;
DRAWTEXT(攻=1 ,L*40 , '攻'),COLOR00FF00,LINETHICK5,ALIGN1;
DRAWTEXT(红=1 ,L*40 , '¤'),COLOR00FF00,LINETHICK1,ALIGN1;
DRAWTEXT(星=1 ,L*40 , '★'),COLOR00FF00,LINETHICK5,ALIGN1;
DRAWTEXT(杀=1 ,L*40 , '杀'),COLOR00FF00,LINETHICK3,ALIGN1;

[[i] 本帖最后由 zlydwq 于 2007-9-13 16:05 编辑 [/i]]

放进大智慧分析家新一代可以通过

不错的思路，谢谢楼主

能简化一点最好，太复杂的公式一来影响速度，二来不容易让人理解思想

用公式来推公式,蠢货一名

ok

有图更好了,谢谢楼主

谢谢提供分享

[img]http://bbs.fjfox.com/forumattach/month_0711/20071101_f97f06d6943cc77effe44Eni8f1eu5aN.gif[/img]
:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:

:bhuhhh:

为何楼主的指标通不过呢
新手
希望楼主能更新代码

大钦敬

:smokin: :plain:

:clap: :clap: :clap: :clap: :clap: